PDC bits
Preview
Bits for drilling soft and medium rocks
Combining cutting-edge engineering techniques and revolutionary design, this line of high-speed steerable bits is specifically designed for drilling wells with high ROP.
The design of this line of bits combines unsurpassed speed and cutting structure durability, allowing drilling both vertical and directional extended-reach wells with the possibility of high DLS.
Bits for drilling hard rocks
This line of bits allows drilling medium, hard and abrasive rocks at a constant high speed. Revolutionary design technology helps achieving maximum vibration damping in difficult intervals and reduces shock loads on cutting structure.
A set of design solutions implemented in the bits of this line allows getting maximum speeds, high penetration and excellent steerability when drilling both vertical and directional wells.
Characteristics
Main cutting structure
OPTION “Y”
Highest abrasion resistant cutters
OPTION “T”
Increased resistance cutters
Backup row
OPTION “E”
Additional row of PDC cutters, located behind the main row.
OPTION “O”
Additional diamond-impregnated carbide inserts located behind the main row
OPTION “C”
Additional stabilization inserts located behind the main row.
Gage part
OPTION “B”
Back reaming cutters on gage relief
OPTION “A”
Gage surface is reinforced with TSP inserts
OPTION “X”
Gage surface protected by diamond-impregnated carbide inserts
Flushing
OPTION “H”
Unchangeable nozzles
Body
OPTION “M”
Matrix body
Tool joint
OPTION “P”
Box connection
Documentation
-
Rock destruction tools catalogue
-
IADC Classification for PDC and Diamond Bits
Reviews
-
Since 2008, “BURINTEKH”, Ltd has been providing bit runs service support when drilling directional and horizontal wells at the fields of Slavneft-Megionneftegaz.
-
Feedback from OAO Slavneft-Megionneftegaz: the use of “BURINTEKH”, Ltd bits made it possible to exceed the planned ROP by 50%.
-
“BURINTEKH”, Ltd renders a range of sidetracking services at the facilities of LLC "Belorusneft-Siberia". The company's equipment allows for trouble-free drilling of wells.
-
BIT 215.9 Z47RS bits were used in a number of areas of LLC Tatneft when drilling production casing interval. The use of bits of this model ensured trouble-free drilling of wells and made it possible to meet the planned ROP targets.
-
At the facilities of Ufa subsidiary RN-Drilling, core recovery was successfully performed using SK-195/100.TS core barrel. The application of the technology made it possible to increase the coring rate in these sections from 1.8 to 6.02 meters per run.
-
With the participation of “BURINTEKH”, Ltd together with LLC "RN-Drilling" during the period from 00:00 30.03.2016 to 00:00 31.03.2016. 2195 rocks were drilled 2195 meters of rocks in the interval from 1054 m - 3249 m.
-
OAO Slavneft-Megionneftegaz thanks “BURINTEKH”, Ltd for the high-quality performance of bit runs service support. The joint work of the companies' specialists has influenced the increase in drilling efficiency and the reduction of well construction time.
-
At the facilities of LLC RN-Uvatneftegaz, a record average ROP of 113 m/h has been achieved.
-
At the facilities of LLC RN-Uvatneftegaz, a record daily footage of 1969 meters was achieved during the first day, when drilling below conductor shoe.
-
At the facilities of RN-Uvatneftegaz, a record daily footage of 1691m has been achieved.
-
At the facilities of OOO Gazprom Neft Novy Port, records were set during the construction of wells: 6.23 and 5.99 days per 1,000 meters.
-
Feedback from RN-Nyaganneftegaz on cooperation with “BURINTEKH”, Ltd: record-breaking drilling performance in all intervals at Kamennaya area were achieved, conditions for high competition and trouble-free operation were created, effective combinations of bit models, PDM and special equipment were tested and selected.
-
At the drilling sites of TNK-Nyagan, LLC, record-breaking high rates of ROP were achieved - 200 m/h in the conductor section and 125 m/h in the production section.
-
At the facilities of OOO LUKOIL-Komi, when drilling an intermediate casing using a bit 295.3 BT 516 YCB.908-01, record figures were achieved: the record for daily footage was 529m, the record for ROP = 45.7 m/h
-
At the Salym Petroleum Development N.V. project record-breaking results were achieved during production section drilling: the average ROP per run was 111 m/h.
-
Feedback from KCA Deutag Drilling GMBH: 19.01.2015 at rig T401 of the Sorovskoye field key indicator was reached - 3 years without recordable incidents. Employees of “BURINTEKH”, Ltd performed their duties safely and without industrial injuries.
-
Feedback from RN-Uvatneftegaz LLC: due to the high professionalism of the personnel and the flawless operation of “BURINTEKH”, Ltd equipment, a high rate of daily footage was achieved - 1518 m.
-
“BURINTEKH”, Ltd provides at the facilities of LLC "LUKOIL-Komi" a range of remedial cementing services during workover. The highly professional work of the engineering and technical personnel of “BURINTEKH”, Ltd is noted.
-
At the Salym Petroleum Development N.V. project record-breaking results were achieved while production casing drilling: daily penetration was 1381 m and the average ROP was 107 m/h.
-
Feedback from the Ufa subsidiary RN-Burenie LLC: for 2013-2014 more than 56,000 m of rocks were drilled with the use of a bit made by “BURINTEKH”, Ltd and more than 400 m of isolated core were recovered.
-
The Ust-Tegusskoye field (RN-Uvatneftegaz LLC) achieved record figures: 8.42 days – well drilling time, 2.94 days/1000 m.
-
At the Ust-Tegusskoye field (RN-Uvatneftegaz LLC) a record rate of ROP for the transport casing interval was achieved - 100 m/h
-
At the Ust-Tegusskoye field (RN-Uvatneftegaz LLC) a record was set for daily footage 1513m.
-
At the Salym Petroleum Development N.V. a well was drilled with a BIT 220.7 BT613YCB.322-01 proeuced by “BURINTEKH”, Ltd with a record average ROP of 95.85 m/h.
-
The use of mills FZ-2SP at the well of OAO Tatneft made it possible to more effectively mill out cemented or fixed in the production casing cylindrical objects due to the specific type and configuration of the cutting structure.
-
Record rates were achieved at “TNK-Uvat” objects: daily footage was 1403m; average production string ROP was 5 m/h.
-
At the Ust-Tegusskoye field (TNK-Uvat LLC) a record was set for daily footage: 1400 m / day. The results were achieved thanks to the use of bit 513 YCB.32-01.000FO.
-
OAO TNK-Nyagan thanks “BURINTEKH”, Ltd for the success in the implementation of horizontal wells construction project.
-
At the Ust-Tegusskoye field (TNK-Uvat LLC) a directional well was drilled in record time: 3.09 days/1000m., daily ROP: 1321m. 1 m/h.
-
OAO TNK-Nyagan thanks “BURINTEKH”, Ltd for the success in the implementation of horizontal wells construction project. Efficiency, technical literacy and responsibility of employees are noted.
-
ARGOS Branch LLC - CHURS uses rock destruction tools for sidetracking and hydraulic jars produced by “BURINTEKH”, Ltd. Feasibility and optimal quality-price ratio are noted.
-
Feedback from the Kogalym branch of SGK-Bureniye LLC: drill bits produced by “BURINTEKH”, Ltd are distinguished by its quality-price ratio, the company promptly responds to the tasks set.
-
“BURINTEKH”, Ltd was the only company that responded to the request of LLC "SGK-Drilling" for the development special design bit, proposing the design of a BIT 142.9 B 613 YH.30. The tool made it possible to solve the problem associated with plugging of flushing holes when pumping plugging pills.
-
The use of “BURINTEKH”, Ltd equipment at the facilities of Nefteyugansk subsidiary LLC "RN-Drilling" made it possible to achieve an annual increase in commercial drilling speed by an average of 5-6%.
-
Feedback on “BURINTEKH”, Ltd bits performance at the facilities of the Nefteyugansk subsidiary LLC "RN-Drilling".: rate of penetration during drilling corresponded to the drilling program, the wear resistance of the bits will allow drilling a well per one run, the wear of the bit is minimal, the vibration indicators are minimal.
-
“BURINTEKH”, Ltd provides services for the provision of bits and engineering support for the Nefteyugansk subsidiary LLC "RN-Drilling". More than 2.5 million meters have been successfully drilled with BURINTEKH bits. More than 50 wells were drilled using MWD support.
-
At the facilities of OAO TNK-Nyagan a record ROP has been achieved – 200 m/h in the conductor section and 125 m/h in the production casing section.
-
“BURINTEKH”, Ltd provides rock destruction tools run comprehensive services and provision of PDM at the facilities of the Nefteyugansk subsidiary ZAO "SSK". The company has established itself as a reliable and stable contractor.
-
A record ROP of 87.22 m/h was achieved during production casing drilling at the Kolik-Eganskoye field (Samotlorneftegaz) with a bit 220.7 BT 416 YCB.02-01 No. 5085.R1.
-
Salym Petroleum Development N.V. confirms that while rendering PDC bits running services the high ROP results and economic viability were shown.
-
At the facilities of Gubkinsky subsidiary LLC RN-Drilling a range of services for construction of directional and horizontal wells is rendered. “BURINTEKH”, Ltd performs work on time and with good quality, uses advanced technologies, the company's equipment allows for trouble-free drilling of wells.
-
LLP "Karakudukmunay" uses “BURINTEKH”, Ltd products for drilling vertical and directional wells. “BURINTEKH”, Ltd bits successfully compete with leading Western companies.
-
Halliburton Sperry Drilling uses “BURINTEKH”, Ltd products as part of oriented BHA. BIT series steerable bits have proven its ability to successfully compete with similar products from other companies.
-
During operations at the facilities of LLC RussNeft-Drilling, “BURINTEKH”, Ltd engineers have proven themselves as experienced specialists. When rendering PDC bits run services high results were shown in terms of ROP. The use of systems "SKIF" and "SKIF+" made it possible to ensure trouble-free drilling.
-
Feedback from OAO TNK-Nyagan on the performance of the bit 142.9 BIT2-MS No. 3122: the performance of the bit made it possible to successfully drill the well to the target depth and case the horizontal section with a liner using FB filters, the bit has a high abrasive resistance, showed high ROP.
-
At the sites of OAO TNK-Nyagan were rendered comprehensive services for workover with sidetracking. The use of a biopolymer mud made it possible to achieve high technical and economic indicators.
-
Feedback from the Nefteyugansk branch of LLC SGK-Drilling on the use of bits BIT-2 produced by “BURINTEKH”, Ltd in drilling horizontal wells: it was possible to achieve high values of ROP and footage per bit.
Records
-
BIT 220.7 BT 613 YCB.321-01
-
BIT 220.7 B 613 TBP.381
-
BIT 219.1 BT 416 YCB.022-01
-
BIT 219.1 BT 416 YCB.022-01
-
BIT 219.1 BT 613 YCB.322-01
-
BIT 215.9 BT 716 YCM.382
-
BIT 215.9 BT 716 YCM.382
-
BIT 215.9 BT 419 YECB.02-01
-
BIT 295.3 B 519 TCM
-
BIT 215.9 BT 416 YECB.02-01
-
BIT 295.3 B 519 TCM
-
BIT 219.1 BT 716 YCM.382
-
BIT 220.7 BT 616 YCB.30-01
-
BIT 220.7 BT 613 YCBAM.322
-
BIT 220.7 BT 416 YCB.02-01
-
BIT 215.9 B 716 YCM.382
-
BIT 215.9 BT 613.321-01
-
BIT 295.3 BT 619.07
-
BIT 220.7 BT 613 YCB.322-01
-
BIT 219.1 B 519 YCB.382-01
-
BIT 311.2 B 519 TCB
-
BIT 220.7 BT 613 YCB.322-01
-
BIT 152.4 B 416 Y.19
-
BIT 220.7 BT 416 YEM
-
BIT 215.9 BT 419 TECB.02-01
-
BIT 215.9 BT 416 YCB.021-01
-
BIT 215.9 BT 419 TECB.02-01
-
BIT 220.7 BT 416 YCB.02-01
-
BIT 295.3 B 519 TCM
-
BIT 215.9 BT 416 Y
-
BIT 311.2 B 419 TC
-
BIT 311.2 B 519 TCB
-
BIT 295.3 BT 619.07
-
BIT 311.2 BT 419 TCB.02
-
BIT 311.2 BT 419 TCB.02
-
BIT 152.4 B 613 Y.30
-
BIT 220.7 BT 613 Y.32-02
-
BIT2-220.7 MC
Publications
-
Reducing vibration while drilling by improving the design of PDC bits
-
Full throttle! More than half of the annual footage in Russia is drilled with “BURINTEKH”, Ltd bits
-
Record ROP values of “BURINTEKH”, Ltd bits
-
Optimization of PDC bit designs aimed at reducing the drilling time for the production casing Strong stand
-
Strong stand
-
Remember the past, live in the moment and believe in the future!
-
In ten years we have managed to become the market leader
-
Kazakhstan: Technological cooperation and common goals
-
“BURINTEKH”, Ltd expands the scope of PDC bits application
-
PDC bit selection principles
-
Approaches to providing rock cutting tools
-
TALAKAN: cooperation is the way to success
-
“BURINTEKH”, Ltd creates a tool for efficient drilling in Eastern Siberia
-
PDC bit high scores
-
Bits produced by “BURINTEKH”, Ltd for hard rocks
-
The practice of using “BURINTEKH”, Ltd PDC bits when using coiled tubing technologies
-
“BURINTEKH”, Ltd: innovative technologies that changed drilling
-
Prospects for the development of drilling technology with PDC bits in the Republic of Kazakhstan
-
“BURINTEKH”, Ltd - Results of 2006
-
1400 meters of meterage per day
Patents
-
Drill blade bit
-
Blade bit with cylindrical cutting structure
-
Drill blade bit
-
Blade bit
-
Blade bit with wear-resistant cylindrical cutting structure
-
Bladed bit with wear-resistant cutting structure (options)
-
Blade bit (options)
-
Blade bit
-
Blade bit
Related production:
Discuss the project
Our experts are always ready to advise you and answer your questions.